Disabled persistent WMO floor grid cache - it stored one height per
2-unit cell causing fall-through at stairs where floor height changes
within a cell. Per-frame dedup cache is sufficient for performance.
Added camera raycast collision against WMO walls (when inside) and M2
objects to zoom in when camera would clip through geometry instead of
phasing through walls.
Relaxed walkable slope threshold from 0.40 to 0.35 (~70° max) for
steeper stair climbing. Tightened WMO floor cache above-tolerance
back to 0.25 units to prevent cached stair landing from overriding
approach floor. Added M2 floor preference for ship decks to prevent
falling through to water below.
Removed blanket 3.5-unit zoom limit when inside any WMO. Now only
constrains zoom when ceiling raycast detects actual structure above.
Increased ceiling detect range from 15 to 20 units. Allows full zoom
on bridges, platforms, ramparts, and other outdoor WMO areas while
still preventing camera clipping through enclosed building ceilings.
When inside a WMO, use:
- Smaller sweep step size (0.20 vs 0.35) for more frequent collision checks
- Tighter player radius (0.45 vs 0.50) for less claustrophobic corridors
- Stronger push response (0.12 vs 0.08 max) for more responsive walls
Prevents clipping through walls in tight indoor spaces while keeping
outdoor movement smooth.
Reduced camera floor step-up budget from 3.0f to 0.5f to prevent
snapping to floors far above camera. Added upward raycast to detect
ceilings/upper floors and constrain zoom distance in multi-story
buildings, preventing camera from phasing through upper levels.
Removed +3.0f offset from camera WMO floor query. The offset combined
with the +2.0f allowAbove in getFloorHeight was detecting floors 5 units
above camera, causing snaps to upper stories. Camera now queries at its
actual Z position to only detect reachable floors.
Remove active group fast path from getFloorHeight to fix bridge clipping.
Replace ground smoothing with immediate step-up snap (WoW-style: snap up,
smooth down). Accept upward Z from wall collision at all call sites. Skip
floor-like surfaces (absNz >= 0.45) in wall collision to prevent false
wall hits on ramps. Increase getFloorHeight allowAbove from 0.5 to 2.0
for ramp reacquisition. Prefer highest reachable surface in floor selection.
Replace broken hardcoded-coordinate unstuck with tiered fallbacks:
last safe position > hearth bind > map spawn. Track safe positions
only on real geometry, let player fall after 500ms with no ground,
and auto-trigger unstuck after 5s of continuous falling.
Add CameraController::teleportTo() that directly places the player at
the target position without the expensive floor-search loop in reset().
The loop does hundreds of WMO collision checks which hangs in cities.
- Add mutex to AssetManager::loadTexture/loadDBC/fileExists to prevent
StormLib thread-safety races that silently fail texture reads; stop
caching texture load failures so transient errors are retried.
- Replace /unstuckgy DBC lookup (which used wrong coordinate transform)
with hardcoded safe locations per map.
- Widen WMO floor raycast from single grid cell to ±1 unit range query
to catch bridge/walkway triangles at cell boundaries.
- Tighten swept collision hit threshold (0.5 → 0.15) and grid query
margin (2.5 → 1.5) to prevent false-positive wall pushes.
- Tighten post-wall-push Z snap lower bound (-1.0 → -0.3) to prevent
gradual floor sinking.
Relax swept collision hit threshold, expand spatial grid query range,
enable WMO floor detection in first person, raise ramp rejection
threshold, and snap Z after wall collision XY adjustment.
Load BLP texture data during prepareTile() and upload to GL cache in
finalizeTile(), eliminating file I/O stalls on the main thread. Reduce
ready tiles per frame to 1. Fix camera sweep to snap Z to ramp surfaces.
Change hearthstone action bar slot from spell to item.
- Add setInstancePosition() to M2Renderer and WMORenderer for moving
transport instances at runtime
- Detect UPDATEFLAG_TRANSPORT on gameobjects and track transport GUIDs
- Parse player-on-transport state from movement blocks
- Wire transport move callback in Application to update render positions
- Implement CMSG_GAMEOBJECT_QUERY / SMSG_GAMEOBJECT_QUERY_RESPONSE so
gameobjects display proper names instead of "Unknown"
- Add name/entry fields to GameObject entity class
- Fix CMSG_USE_ITEM packet: remove extra uint8 that shifted the item
GUID by one byte, breaking hearthstone and all item usage
- Remove redundant CMSG_LOOT after CMSG_GAMEOBJECT_USE for chests
- Show PvP enabled/disabled state in toggle message
- Relax WMO ramp wall-collision step-up check to allow walking on
gentle ramps where floor rise per step is under 0.1 units
- Add M2 fallback when WMO group files fail to load for gameobjects
- Handle re-creation of existing gameobject render instances by
updating position instead of silently ignoring
Use WMO-aware floor detection for camera clearance so tunnels don't
push the camera up to terrain. Clear permanent auras on dismount via
mount display field. Use center-only sampling for terrain/WMO floors
to prevent offset probes from snapping to terrain above tunnels.
Skip wall collision when a walkable floor exists above current feet,
allowing smooth stair traversal without per-zone tuning. Disable R key
camera reset to avoid conflicts with chat.
selectReachableFloor now picks the floor closest to the player instead of the highest, so tunnels and caves use the WMO floor rather than the terrain surface above.
Add 36 arena and battleground opcodes with handlers for queue status, team events, invites, and errors. Fix SMSG_FORCE_RUN_SPEED_CHANGE parsing (uint8 not uint32) and remove manual mount speed tracking. Buff bar now shows spell icons and is positioned below the minimap. Both mouse buttons cancel autorun.
- Fix SMSG_FORCE_RUN_SPEED_CHANGE parsing (missing uint32 field caused garbage speed)
- Always send speed ACK to prevent server stall, even on invalid values
- Defer mount model loading to next frame to avoid render-loop hang
- Compute mount height from tight vertex bounds instead of M2 header bounds
- Dismount when entering combat or casting spells while mounted
- Prevent auto-attacking yourself when self-targeted
- Leave combat when 40+ yards from target, close vendor at 15+ yards
- Pre-open X11 display for reliable mouse release in signal handlers
Render mount M2 model under player with seated animation, apply creature
skin textures, server-driven speed via SMSG_FORCE_RUN_SPEED_CHANGE, and
/dismount command. X11 XUngrabPointer on crash/hang to always release mouse.
- Remove early-out in wall collision so multiple wall faces are resolved
per frame, preventing corner clip-through
- Update localTo after each wall push so subsequent triangles check
against the corrected position
- Tighten collision sweep steps from 0.65 to 0.35 units (max 5 steps)
for better tunneling prevention on thin walls and corners
- Implement flight path system: SMSG_SHOWTAXINODES parser, CMSG_ACTIVATETAXIEXPRESS builder, BFS multi-hop pathfinding through TaxiNodes/TaxiPath DBC, taxi destination UI, movement blocking during flight
- Fix WMO interiors too dark by boosting vertex color lighting multiplier
- Dim M2 objects inside WMO interiors (rugs, furniture) via per-instance interior detection
- Fix ramp/stair clipping by lowering wall collision normal threshold from 0.85 to 0.55
- Restore 5-sample cardinal footprint for ground detection to fix rug slipping
- Fix /unstuck command to reset player Z to WMO/terrain floor height
- Handle MSG_MOVE_TELEPORT_ACK and SMSG_TRANSFER_PENDING for hearthstone teleports
- Fix spawning under Stormwind with online-mode camera controller reset
Sweep step size reduced from 1.0f back to 0.65f with max 3 steps (was 2)
to prevent clipping through ramps in Stormwind. All paths updated: follow,
free-fly, and swimming.
Shadows disabled by default in renderer, settings UI, and settings defaults.
Spawn fix: floor probe used terrain height (underground) instead of server
position when searching for spawn floor. Now probes from max(terrain, serverZ)
so WMO city surfaces above terrain are found correctly. Also invalidates
floor cache on respawn.
Delete button: moved from details panel to bottom row (small, red, far right).
Two-stage confirmation with modal popups: first asks "are you sure", second
warns "THIS CANNOT BE UNDONE" with red DELETE PERMANENTLY button.
- Skip wall collision sweep entirely when player isn't moving (saves all
collision calls when standing still)
- Reduce max sweep steps from 4 to 2 with 1.0f step size (all paths:
follow, free-fly, swimming)
- Cache floor height between frames, reuse when position changes <0.5 units
- Fix floor height not updating after walking off tall objects (fountain etc)
by always smoothing toward detected ground instead of ignoring drops >2 units
- Reduce free-fly ground probes from 5 to 1
- Disable WMO camera collision (raycast + floor probes) for performance
- Add spatial grid to raycastBoundingBoxes for when camera collision is re-enabled
Build a 2D triangle grid per WMO group at load time so getFloorHeight and
checkWallCollision only test triangles in nearby cells instead of brute-forcing
all triangles. Also reduce sweep steps (12→4), ground probes (3→1), camera
floor probes (5→2), throttle isInsideWMO to every 10 frames, and early-out
wall collision on first hit.
- Fix CMSG_BUY_ITEM count field from uint8 to uint32 (server silently dropped undersized packets)
- Character select screen: remember last selected character, two-column layout with details panel, double-click to enter world, responsive window sizing
- Fix stale character data between logins by replacing static init flag with per-character GUID tracking
- Parallelize WMO visibility culling across worker threads (same pattern as M2 renderer)
- Optimize WMO collision queries with world-space group bounds early rejection in getFloorHeight, checkWallCollision, isInsideWMO, and raycastBoundingBoxes
- Reduce camera ground samples from 5 to 3 movement-aligned probes
- Add WMO interior lighting, unlit materials, vertex color multiply, and alpha blending support
Smooth idle camera orbit without jump at loop boundary, click empty space to
deselect target, auto-target when attacked, fix critter hostility so neutral
factions aren't flagged red, add armor/stats to item templates, fix loot
iterator invalidation, show item template names as fallback, position drop
confirmation at cursor, remove [SYSTEM] chat prefix, show NPC names in monster
say/yell, and prevent auto-login on character select screen.
Split inventory into bags-only (B key) and character screen (C key). Vendor window
auto-opens bags with sell prices on hover and right-click to sell. Add camera intro
pan on all login/spawn/teleport/hearthstone events and idle orbit after 2 minutes.
Add quest log UI, SMSG_MONSTER_MOVE handling, deferred creature spawn queue, and
creature fade-in/movement interpolation for online mode.
Reduce max zoom to 15 units when inside a building. Increase player
collision radius to 0.70, lower step height threshold, and use more
aggressive pushback and finer sweep steps to prevent wall clipping.
- Remove complex ramp/edge filtering that was skipping building walls
- Simpler wall detection: any vertical geometry above step height
- Add intro camera pan on game start
Don't snap player down when detected floor is >2 units below current
position. This prevents falling through upper floors when the raycast
accidentally detects the ground floor through geometry gaps.
- Increase footprint sampling radius from 0.28 to 0.4 units
- Only update floor cache if found floor is close to query height
- Prevents caching wrong floor from different stories
