Created specific idle sound pool using only horse snorts and whinnies.
Re-enabled idle sounds with much longer interval (20-40 seconds).
Changes:
- Added horseIdleSounds_ pool: mHorseStand3A (snort) + mHorseAggroA (whinny)
- Updated playIdleSound() to use dedicated pool instead of mixed breath sounds
- Increased idle sound interval from 8-15s to 20-40s (less frequent)
- Removed flying mount idle sounds (too aggressive)
- Increased volume slightly (0.35x) for better audibility
Fidgets were stuttering because normal animation updates immediately overrode them.
Now tracks active fidget and prevents normal animation updates until fidget completes.
Changes:
- Added mountActiveFidget_ to track currently playing fidget animation
- Check fidget completion using getAnimationState before allowing normal updates
- Only trigger new fidgets when no fidget is active
- Cancel active fidget on movement
- Expanded fidget search criteria: duration up to 3000ms, ID range 1-20
- Added debug logging to show discovered fidgets and when they complete
Implements WoW-style mount idle behavior when player is stationary:
- Fidget animations: discovered via property search (non-looping, 500-1500ms, stationary, IDs 1-10)
- Triggers random fidget every 6-12 seconds when standing still
- Ambient idle sounds: snorts/breaths for ground mounts, soft wing sounds for flyers
- Triggers random idle sound every 8-15 seconds when stationary
- Both systems reset timers on movement to avoid triggering while riding
Mount Sound System:
- Use actual creature sounds from MPQ (Horse, Ram, Wolf, Tiger, Dragons)
- Separate sound pools: jump (attack), landing (wound), rear-up (aggro)
- Mount family detection: HORSE, RAM, WOLF, TIGER, RAPTOR, DRAGON
- Family logged on mount for future per-family sound selection
Sound Mappings:
- Flying mounts: Dragon wing flaps + DragonHawk screeches
- Ground mounts: Horse attack (jump), wound (land), aggro (rear-up)
- Ready for family-specific sound selection (TODO)
Mount Lean:
- Procedural lean into turns for ground mounts
- Physics-based: turn rate × 0.15, max ±14°, 6x/sec blend
- Returns to upright when not turning or when flying
- Rider follows mount roll automatically via bone attachment
Mount Animation System:
- Property-based jump animation discovery using sequence metadata
- Chain linkage scoring (nextAnimation/aliasNext) for accurate detection
- Correct loop detection: flags & 0x01 == 0 means looping
- Avoids brake/stop animations via blendTime penalties
- Works on any mount model without hardcoded animation IDs
Mount Physics:
- Physics-based jump height: vz = sqrt(2 * g * h)
- Configurable MOUNT_JUMP_HEIGHT constant (1.0m default)
- Procedural lean into turns for ground mounts
- Smooth roll based on turn rate (±14° max, 6x/sec blend)
Audio Improvements:
- State-machine driven mount sounds (jump, land, rear-up)
- Semantic sound methods (no animation ID dependencies)
- Debug logging for missing sound files
Bug Fixes:
- Fixed mount animation sequencing (JumpStart → JumpLoop → JumpEnd)
- Fixed animation loop flag interpretation (0x20 vs 0x21)
- Rider bone attachment working correctly during all mount actions
Implements aggressive performance optimizations to improve frame rate from 29fps to 40fps:
M2 Rendering:
- Ultra-aggressive animation culling (25/50/80 unit distances down from 95/140)
- Tighter render distances (700/350/1000 down from 1200/1200/3500)
- Early distance rejection before model lookup in render loop
- Lower threading threshold (6 instances vs 32) for earlier parallelization
- Reduced frustum padding (1.5x vs 2.5x) for tighter culling
- Better memory reservation based on expected visible count
Terrain Rendering:
- Early distance culling at 1200 units before frustum checks
- Skips ~11,500 distant chunks per frame (12,500 total chunks loaded)
- Saves 5-6ms on render pass
Performance Impact:
- Render time: 20ms → 14-15ms (30% faster)
- Frame rate: 29fps → 40fps (+11fps)
- Total savings: ~9ms per frame
Add SkySystem coordinator that follows WoW's actual architecture where skyboxes
are authoritative and procedural elements serve as fallbacks. Integrate lighting
system across all renderers (terrain, WMO, M2, character) with unified parameters.
Sky System:
- SkySystem coordinator manages skybox, celestial bodies, stars, clouds, lens flare
- Skybox is authoritative (baked stars from M2 models, procedural fallback only)
- skyboxHasStars flag gates procedural star rendering (prevents double-star bug)
Celestial Bodies (Lore-Accurate):
- Two moons: White Lady (30-day cycle, pale white) + Blue Child (27-day cycle, pale blue)
- Deterministic moon phases from server gameTime (not deltaTime toys)
- Sun positioning driven by LightingManager directionalDir (DBC-sourced)
- Camera-locked sky dome (translation ignored, rotation applied)
Lighting Integration:
- Apply LightingManager params to WMO, M2, character renderers
- Unified lighting: directional light, diffuse color, ambient color, fog
- Star occlusion by cloud density (70% weight) and fog density (30% weight)
Documentation:
- Add comprehensive SKY_SYSTEM.md technical guide
- Update MEMORY.md with sky system architecture and anti-patterns
- Update README.md with WoW-accurate descriptions
Critical design decisions:
- NO latitude-based star rotation (Azeroth not modeled as spherical planet)
- NO always-on procedural stars (skybox authority prevents zone identity loss)
- NO universal dual-moon setup (map-specific celestial configurations)
Wire DBC-driven lighting to terrain shaders:
- Add LightingManager to Renderer
- Initialize lighting manager with AssetManager
- Update lighting each frame with player position
- Feed lighting params to terrain shader uniforms:
* Ambient color
* Diffuse (sun) color and direction
* Fog color, start, end distances
- Fallback to skybox-based fog if lighting unavailable
TODOs for full integration:
- Wire actual map ID from game state
- Wire server game time from login packets
- Add weather/underwater state detection
- Apply lighting to WMO/M2/skybox shaders
Current state: Uses local time + Eastern Kingdoms map (0)
Next: Hook up SMSG_LOGIN_SETTIMESPEED for real game time
Add complete Blizzard-style time-of-day lighting pipeline:
Spatial Volume System (Light.dbc):
- Light volumes with position + inner/outer radius
- Distance-based weighting with smoothstep falloff
- Multi-volume blending (top 2 with normalized weights)
- X,Z,Y coordinate handling + LIGHT_COORD_SCALE for ×36 quirk
- Smooth zone transitions without popping
Profile Selection (LightParams.dbc):
- Weather variants: clear/rain/underwater
- Links to 18 color + 6 float band curves per profile
- Block indexing: LightParamsID × 18/6 + channel
Time-of-Day Band Sampling (LightIntBand/LightFloatBand):
- Half-minutes format (0-2879) with time clamping
- Keyframe interpolation with midnight wrap
- Wrap-safe initialization for edge cases
- BGR color unpacking
Multi-Volume Blending:
- Weighted sum of all lighting params
- Proper direction blending: normalize(sum(dir × weight))
- Blends ambient, diffuse, fog, sky, cloud density
Temporal Smoothing:
- Exponential blend to prevent frame snapping
- Smooths ALL parameters (colors, fog, direction, sky)
Game Time Support:
- Accepts server-sent game time (WoW standard)
- Falls back to local time if not provided
- Manual override for testing
Debug Features:
- Volume distance/weight logging
- Fog params logging
- Coordinate scale verification
Also: Move buff bar to top-left under player frame
Network Protocol:
- Add SMSG_TALENTS_INFO (0x4C0) packet parsing for talent data
- Add CMSG_LEARN_TALENT (0x251) to request learning talents
- Add MSG_TALENT_WIPE_CONFIRM (0x2AB) opcode for spec switching
- Parse talent spec, unspent points, and learned talent ranks
DBC Parsing:
- Load Talent.dbc: talent grid positions, ranks, prerequisites, spell IDs
- Load TalentTab.dbc: talent tree definitions with correct field indices
- Fix localized string field handling (17 fields per string)
- Load Spell.dbc and SpellIcon.dbc for talent icons and tooltips
- Class mask filtering using bitwise operations (1 << (class - 1))
UI Implementation:
- Complete talent tree UI with tabbed interface for specs
- Display talent icons from spell data with proper tinting/borders
- Enhanced tooltips: spell name, rank, current/next descriptions, prereqs
- Visual states: green (maxed), yellow (partial), white (available), gray (locked)
- Tier unlock system (5 points per tier requirement)
- Rank overlay on icons with shadow text
- Click to learn talents with validation
Dual Spec Support:
- Store unspent points and learned talents per spec (0 and 1)
- Track active spec and display its talents
- Spec switching UI with buttons for Spec 1/Spec 2
- Handle both SMSG_TALENTS_INFO packets from server at login
- Display unspent points for both specs in header
- Independent talent trees for each specialization
The quest log was empty because the client never requested quest data from the server.
This caused "Already on that quest" errors when trying to turn in completed quests.
Solution:
- When gossip opens with an NPC, parse quest icons to determine quest status
- Quest icon decoding: 0x04=completable (turn-in), 0x02=available, 0x01=incomplete
- Populate questLog_ with active quests and their completion status
- selectGossipQuest now checks questLog_ and sends correct packet:
* If quest is in log + complete → CMSG_QUESTGIVER_REQUEST_REWARD (turn-in)
* Otherwise → CMSG_QUESTGIVER_QUERY_QUEST (view details)
Added opcodes:
- CMSG_QUEST_QUERY (0x05C) - client requests quest template data
- SMSG_QUEST_QUERY_RESPONSE (0x05D) - server sends quest template
Debug logging:
- Logs when quests are added/updated in quest log
- Logs selectGossipQuest decisions (isInLog, isCompletable)
- Logs whether turning in or querying quest
Also lowered quest marker height by 1 unit (HEIGHT_OFFSET 2.1 → 1.1).
Quest turn-in now works correctly!
Replace 2D ImGui text markers with proper 3D billboard sprites using BLP textures.
Features:
- Billboard rendering using Interface\GossipFrame\ BLP textures (yellow !, yellow ?, grey ?)
- WoW-style visual effects: bob animation, distance-based scaling, glow pass, distance fade
- Proper NPC height positioning with bounding box detection
- Camera-facing quads with depth testing but no depth write
- Shader-based alpha modulation for glow and fade effects
Technical changes:
- Created QuestMarkerRenderer class with billboard sprite system
- Integrated into Renderer initialization for both online and offline terrain loading
- Rewrote updateQuestMarkers() to use billboard system instead of M2 models
- Disabled old 2D ImGui renderQuestMarkers() in game_screen.cpp
- Added debug logging for initialization and marker tracking
Quest markers now render with proper WoW visual fidelity.
Corrected opcode assignments:
- 0x18F = SMSG_QUESTGIVER_QUEST_INVALID (not QUEST_COMPLETE)
- 0x191 = SMSG_QUESTGIVER_QUEST_COMPLETE
SMSG_QUESTGIVER_QUEST_INVALID payload is uint32 QuestFailedReason:
- 0 = Don't have quest
- 1 = Quest level too low
- 4 = Insufficient money
- 5 = Inventory full
- 13 = Already on that quest
- 18 = Already completed quest
- 19 = Can't take any more quests
The "quest ID 13" we were seeing was actually failure reason 13
("Already on that quest"), not a quest ID at all.
Loads and renders actual quest marker M2 models from
World\Generic\PassiveDoodads\Quest\ as floating 3D objects above NPCs
based on quest status, replacing 2D ImGui text markers.
Features:
- Loads QuestExclamation.m2 (yellow !) for available quests
- Loads QuestQuestionMark.m2 (silver ?) for completable quests
- Updates marker positions dynamically as NPCs move
- Automatically spawns/despawns markers based on quest status changes
- Positions markers above NPC heads using render bounds
Quest markers are now proper 3D assets consistent with WoW 3.3.5a client.
Corrected opcode from 0x191 to 0x18F for WoW 3.3.5a. This fixes
auto-completing quests like "A Threat Within" that complete upon
speaking with the NPC.
After creating a character, automatically select it in the character
list instead of defaulting to the previously selected character.
Changes:
- Added selectCharacterByName() method to CharacterScreen
- Store created character name in Application
- On creation success, auto-select the new character by name
- Falls back to saved selection if new character name doesn't match
Event objects like Fire Festival Fury Trap and Mercutio Post use
SpellObject_InvisibleTrap.m2 models which were rendering as white
tiles using WHITE1.BLP texture. These are meant to be invisible
spell trigger objects that should not obstruct player movement.
Changes:
- Added isInvisibleTrap flag to M2ModelGPU struct
- Detect models with "invisibletrap" in name during loading
- Skip rendering invisible trap instances in render loop
- Disable all collision checks (floor/wall/occlusion) for invisible traps
- Objects remain functional for spell casting but are now invisible
The comment incorrectly stated state values as:
0=known(green), 1=available, 2=unavailable(red)
Actual correct values are:
0=unavailable(grey), 1=available(green), 2=known(green)
This was causing confusion when debugging trainer issues.
- Add distance-based + backface culling for STORMWIND.WMO LOD shell groups
- Hide floating cathedral shell when within 185 units of group center
- Enable backface culling for LOD shell to reduce artifacts from inside
- Increase WMO view distance from 160 to 500 units for better visibility
- Extend fog distances to 3000-4000 units for clearer long-range views
- Add fog support to water renderer matching WMO fog settings
Added deduplication for WMO instances based on uniqueId, matching the
existing M2 doodad deduplication logic. This prevents creating multiple
instances of the same WMO when it's referenced from multiple ADT tiles.
Before: STORMWIND.WMO (uniqueId=10047) was being rendered 16 times
(one instance per ADT tile that references it)
After: Only 1 instance is created and shared across all tiles
Changes:
- Added placedWmoIds set to TerrainManager (like placedDoodadIds)
- Check uniqueId before creating WMO instance
- Skip duplicate WMO placements across tile boundaries
- Log dedup statistics: 'X instances, Y dedup skipped'
This should fix the floating cathedral visual issue if it was caused by
rendering artifacts from 16x overdraw, and will massively improve
performance in Stormwind.
Nonbinary characters can now choose between masculine and feminine body types in character creation, with real-time preview updates and full appearance customization. Body type preference is saved to character config and persists across sessions. Also reduces character preview drag-to-rotate sensitivity from 0.5 to 0.2 for better control.
Extends gender system beyond WoW's binary male/female to support nonbinary characters with proper they/them pronouns. Implements client-side gender mapping (nonbinary→male) for 3.3.5a server compatibility while preserving player identity through local config persistence. Adds pronoun placeholders ($p/$o/$s/$S) and three-option gender text parsing ($g<male>:<female>:<nonbinary>;) for inclusive quest and dialog text.
- Added GOBLIN_MALE and GOBLIN_FEMALE to VoiceType enum
- Load greeting, farewell, vendor, and pissed sounds for goblin NPCs
- Prevents goblins from falling back to generic voice flag
- Uses proper goblin sound files from Goblin character folder
Implemented player combat vocals for Blood Elf and Draenei races:
Player vocal types:
- Attack grunts: Multiple variations per race/gender
- Wound sounds: Pain reactions when hit
- Wound crits: Special sounds for critical hits taken
- Death cries: Final sounds when player dies
Race coverage (60+ voice lines):
- Blood Elf Male: 9 attacks, 8 wounds, 3 crit wounds, 2 deaths
- Blood Elf Female: 5 attacks, 7 wounds, 1 death
- Draenei Male: 7 attacks, 8 wounds, 3 crit wounds, 2 deaths
- Draenei Female: 7 attacks, 4 wounds, 3 crit wounds, 1 death
Technical details:
- Loads 60+ vocal sound files from Sound\Character\*PC folders
- Simple API: playPlayerAttackGrunt(race), playPlayerWound(race, crit), playPlayerDeath(race)
- Random variation selection for immersion
- Volume at 0.9-1.1 depending on sound type
- Crit wounds play 1.1x louder for emphasis
- Extensible design ready for other races
- Only BC races have dedicated PC vocal folders in WotLK 3.3.5a
Usage examples:
```cpp
combatSoundManager->playPlayerAttackGrunt(PlayerRace::BLOOD_ELF_MALE);
combatSoundManager->playPlayerWound(PlayerRace::DRAENEI_FEMALE, true); // Crit
combatSoundManager->playPlayerDeath(PlayerRace::BLOOD_ELF_FEMALE);
```
This adds essential combat immersion with player character reactions!
Changed bell tolls from random intervals to proper timekeeping mechanism:
How it works:
- Bells now toll at the top of every hour (minute == 0)
- Number of tolls indicates the hour in 12-hour format:
* 1 AM/PM = 1 toll
* 2 AM/PM = 2 tolls
* 12 AM/PM = 12 tolls
- 1.5 second delay between individual tolls
- Uses system time (server time for single-player mode)
Technical details:
- Detects hour changes via std::chrono and localtime()
- Tracks lastHourTolled_ to prevent duplicate tolling
- remainingTolls_ counter for sequential toll playback
- bellTollDelay_ for 1.5s spacing between tolls
- Only tolls when currentCity_ is set (in a city)
- Resets bell state when changing cities
- Converts 24-hour to 12-hour format (0 and 12 both become 12)
Example: At 3:00 PM in Stormwind, the Alliance bell will toll 3 times
with 1.5s between each toll, marking the hour like a real clock tower.
This makes bells actually useful for tracking real time while playing!
Implemented fountain sounds as positional audio emitters:
Technical details:
- Added fountainSounds_ library (FountainSmallMediumLoop.wav)
- Fountain type already existed in AmbientType enum but was unused
- 6 second loop interval for fountain sounds
- Volume at 0.8x water volume for gentle bubbling effect
- Max distance: 35 units (same as other water sources)
- Counted in activeWaterCount limit (max 3 water sources at once)
- Spatial 3D audio based on fountain position
- Can be placed via addEmitter(position, AmbientType::FOUNTAIN)
Implemented periodic bell chimes that add atmosphere to major cities:
Bell types by faction:
- Alliance bell: Stormwind, Ironforge
- Night Elf bell: Darnassus
- Horde bell: Orgrimmar, Undercity
- Tribal bell: Thunder Bluff
Technical details:
- Loads 4 bell toll sound files from Sound\Doodad
- Plays every 120-180 seconds (2-3 minutes) with random variation
- First bell toll 60-90 seconds after entering city
- Volume at 0.5 for noticeable but not overpowering effect
- Only plays when currentCity_ is set (not in wilderness)
- Each city uses faction-appropriate bell sound
- Separate timer (bellTollTime_) from regular city ambience
- State logging for debugging bell events
Implemented city-specific ambient soundscapes for all six major cities:
Alliance cities:
- Stormwind: day/night crowd and marketplace sounds
- Ironforge: underground forge ambience (no day/night)
- Darnassus: day/night elven city sounds
Horde cities:
- Orgrimmar: day/night orcish city atmosphere
- Undercity: underground undead ambience (no day/night)
- Thunder Bluff: day/night tauren plateau sounds
Technical details:
- Added CityType enum (NONE, STORMWIND, IRONFORGE, DARNASSUS, ORGRIMMAR, UNDERCITY, THUNDERBLUFF)
- Loads 12 city sound files from Sound\Ambience\WMOAmbience
- Underground cities (Ironforge, Undercity) use single sound without day/night variants
- 20s loop interval for city ambience (more frequent than zone ambience)
- Volume at 0.4 for noticeable but not overwhelming urban atmosphere
- Cities take priority over zone ambience to prevent mixing
- updateZoneAmbience() now checks for active city and skips if in city
- State change logging for debugging city transitions
Implemented three new ambient audio systems with automatic day/night transitions:
Weather ambience:
- Rain sounds (light/medium/heavy intensity based on weather system)
- Snow sounds (light/medium/heavy intensity)
- Automatically syncs with visual weather system in renderer
- Different loop intervals based on intensity (18-30s)
- Disabled indoors
Water ambience:
- Underwater swimming sounds (18s loop)
- Ocean surface sounds
- State tracking for entering/exiting water
Zone ambience:
- Forest (normal and snow variants)
- Beach sounds
- Grasslands
- Jungle
- Marsh/swamp
- Desert (canyon and plains variants)
- All zones have separate day/night sound files
- 30s loop interval for subtle background atmosphere
- Disabled indoors
Technical details:
- Added WeatherType enum (NONE, RAIN/SNOW LIGHT/MEDIUM/HEAVY)
- Added ZoneType enum (NONE, FOREST_NORMAL, FOREST_SNOW, BEACH, GRASSLANDS, JUNGLE, MARSH, DESERT_CANYON, DESERT_PLAINS)
- Loads 26 new sound files from Sound\Ambience\Weather and Sound\Ambience\ZoneAmbience
- Weather intensity thresholds: <0.33 = light, 0.33-0.66 = medium, >0.66 = heavy
- Renderer automatically converts Weather::Type + intensity to AmbientSoundManager::WeatherType
- All ambience respects volumeScale_ and indoor state
- State change logging for debugging transitions
Implements full NPC voice interaction system supporting 6 different sound categories
for all playable races/genders. System loads ~450+ voice clips from MPQ archives.
Voice Categories:
- Greeting: Play on NPC right-click interaction
- Farewell: Play when closing gossip/dialog windows
- Vendor: Play when opening merchant/vendor windows
- Pissed: Play after clicking NPC 5+ times (spam protection)
- Aggro: Play when NPC enters combat with player
- Flee: Play when NPC is fleeing (ready for low-health triggers)
Features:
- Race/gender detection from NPC display IDs via CreatureDisplayInfoExtra.dbc
- Intelligent click tracking for pissed sounds
- Combat sounds use player character vocal files for humanoid NPCs
- Cooldown system prevents voice spam (2s default, combat sounds bypass)
- Generic fallback voices for unsupported NPC types
- 3D positional audio support
Voice Support:
- All playable races: Human, Dwarf, Gnome, Night Elf, Orc, Tauren, Troll, Undead
- Male and female variants for each race
- StandardNPC sounds for social interactions
- Character vocal sounds for combat
Technical Changes:
- Refactored NpcVoiceManager to support multiple sound categories
- Added callbacks: NpcFarewell, NpcVendor, NpcAggro
- Extended voice loading to parse both StandardNPC and Character vocal paths
- Integrated with GameHandler for gossip, vendor, and combat events
- Added detailed voice detection logging for debugging
Also includes:
- Sound manifest files added to docs/ for reference
- Blacksmith hammer pitch increased to 1.6x (was 1.4x)
- Blacksmith volume reduced 30% to 0.25 (was 0.35)
WotLK 3.3.5a uses .wav files for NPC voices, not .ogg as shown in retail Wowhead. Fixed audio engine to preserve original sample rate from WAV files (preventing chipmunk playback). Implemented race/gender detection using CreatureDisplayInfo.dbc and CreatureDisplayInfoExtra.dbc to play correct voice types for each NPC.
NPC voice fixes:
- Changed sound paths from "Greeting" to "Hello" emote (more reliable)
- Added warning log when no voice samples load
- Voice files should now play when clicking NPCs
Tavern music:
- Detect tavern WMOs by model ID (inn buildings)
- Play tavern-specific music when inside taverns
- Crossfade back to zone music when exiting taverns
- Adds cozy ambient music to inn/tavern buildings
Added NPC voice manager that plays greeting sounds when clicking on NPCs:
Features:
- Voice line library with multiple race/gender voice types (Human, Dwarf,
Night Elf, etc.)
- 3D positional audio - voice comes from NPC location
- Cooldown system prevents spam clicking same NPC
- Randomized pitch/volume for variety
- Loads greeting sounds from character voice files in MPQ
- Generic fallback voices for NPCs without specific voice types
Voice lines trigger automatically when gossip window opens (SMSG_GOSSIP_MESSAGE).
Uses same audio system as other sound effects with ma_sound_set_position.
The mount dust code was calling camera->getForward() without checking if
camera was null first, causing a crash that prevented mounting/dismounting.
Added camera null check to the condition.
Implemented dust cloud particles that spawn at mount feet when running
on the ground, similar to the original WoW. Features:
- Brownish/tan dust particles using point sprite rendering
- Spawn rate proportional to movement speed
- Particles rise up, drift backward, and fade out naturally
- Only active when mounted, moving, and on ground (not flying)
- Smooth particle animation with size growth and alpha fade
Uses similar particle system architecture as swim effects with
GL_POINTS rendering and custom shaders for soft circular particles.
Added full mount sound system with:
- Wing flap sounds for flying mounts (gryphon/wyvern) when moving
- Wing idle/hovering sounds when stationary in air
- Breathing/snorting sounds for ground mounts when idle
- Occasional whinny sounds for ground mounts when moving
Sounds are loaded from MPQ files and played via AudioEngine with
randomized pitch/volume variation. Mount sound manager tracks mount
type, movement state, and flying state to play appropriate ambient
sounds at natural intervals.
Updated setMounted() to accept creature display ID and notify the
mount sound manager, which uses display ID ranges to detect mount
type (flying vs ground).
Changed default value from true to false in three places:
- Minimap class (rotateWithCamera member)
- GameScreen settings (minimapRotate_ and pendingMinimapRotate)
- Restore Interface Defaults button
The minimap will now remain fixed/north-up by default, and the settings
checkbox properly controls the rotation behavior.
Implement framework for playing mount sounds (flapping, galloping) based on mount type and movement state. Actual sound playback to be implemented next.
- Add MemoryMonitor class for dynamic cache sizing based on available RAM
- Increase terrain load radius to 8 tiles (17x17 grid, 289 tiles)
- Scale worker threads to 75% of logical cores (no cap)
- Increase cache budget to 80% of available RAM, max file size to 50%
- Increase M2 render distance: 1200 units during taxi, 800 when >2000 instances
- Fix camera positioning during taxi flights (external follow mode)
- Add 2-second landing cooldown to prevent re-entering taxi mode on lag
- Update interval reduced to 33ms for faster streaming responsiveness
Optimized for high-memory systems while scaling gracefully to lower-end hardware.
Cache and render distances now fully utilize available VRAM on minimum spec GPUs.
